Screen Setup For Pc Mode - LG 37LDD Owner's Manual

Screen Setup for PC mode

- When RGB connect to PC input and select the RGB-PC, this function is used.
- When HDMI/DVI connect to PC input and select HDMI/DVI input, this function is used.
- In RGB-DTV mode, SIZE and PHASE is not available.
- After connecting RGB-PC or HDMI/DVI to PC input and checking the screen quality.
* Adjustment for screen Position, Size, and Phase
Mini Glossary
Position This function is to adjust
picture to left/right and
up/down as you prefer.
Size This function is to mini-
mize any vertical bars or
stripes visible on
screen background. And
the horizontal screen size
will also change.
Phase This function allows you to
remove any horizontal
noise and clear or sharpen
the image of characters.
* Initializing (Reset to original factory values)
- To initialize the adjusted values
POSITION
SIZE
PHASE
RESET
Adjust Close
1
Press the ADJUST button and then use
SIZE PHASE
, or
2
Press ENTER button and then use
appropriate adjustments.
PHASE
• The adjustment range is -16 ~ +16.
(In HDMI/DVI-PC mode,
the
SIZE
• The adjustment range is -50 ~ +50.
3
Press ENTER button.
POSITION
SIZE
PHASE
G
RESET
Close
Adjust
1
Press the ADJUST button and then use
RESET
option.
2
Press ENTER button and then use
3
Press ENTER button.
G
D
F G
E
D / E
.
D / E / F / G
PHASE
is not available.)
Initialize Settings
F / G
Installation
POSITION
button to select
buttons to make
button to select the
D / E
Yes
button to select .
,