External A/V Source Setup; Monitor Out Setup / Dvd Setup - LG DU-30LZ30 Owner's Manual

External A/V Source Setup
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. (If connected to A/V INPUT 1, select
Video 1 input source).
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.
Monitor Out Setup
Monitor Out Setup
The TV has a special signal output capability which allows you to hook up a sec-
ond TV or monitor.
Connect the second TV or monitor to the TV's MONITOR OUTPUT. See the
Operating Manual of the second TV or monitor for further details regarding that
device's input settings.
NOTE
• Component, RGB-PC/RGB-DTV, DVI-PC/DVI-DTV, DTV input sources cannot
be used for Monitor out.
DVD Setup
DVD Setup
How to connect
1. Connect the DVD video outputs (Y, P
PONENT (Y, P , P ) INPUT jacks on the TV and connect
B R
the DVD audio outputs to the AUDIO INPUT jacks on the
TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this
to the S-VIDEO input on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as
shown in the figure.
NOTE: If your DVD player does not have component video
output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or COMP/RGB/DVI button on the
remote control to select Component 1 or Component 2.
(If connected to S-VIDEO, select the Video 1 or Video 2
external input source.)
3. Refer to the DVD player's manual for operating instruc-
tions.
• Component Input ports
To get better picture quality, connect a DVD player
to the component input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
, P ) to the COM-
B R
NOTES
• Digital Audio will not work for Component 2 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R
are connected at the same time.
Y P P
B R
Pr
Y Pb
Y B-Y R-Y
Cr
Y Cb
P
Y P
R
B
MONITOR
COMPONENT 2
DVD OUTPUT
/DTV
INPUT
A/V
COMPONENT 1
INPUT1
(MONO)
R L R AUDIO L
AUDIO INPUT VIDEO INPUT
AUDIO
R L
AUDIO INPUT
DVI COMPONENT1 PC/DVI
OUTPUT
INPUT INPUT AUDIO INPUT
R L
RGB INPUT
DIGITAL AUDIO
(PC/DTV INPUT)
(OPTICAL)
AUDIO INPUT
or
DIGITAL AUDIO (R) AUDIO (L)
OPTICAL
Installation
S-VIDEO
VIDEO
Camcorder
Video Game Set
VIDEO
MONITOR
COMPONENT 2
DVD OUTPUT
/DTV
INPUT
A/V S-VIDEO
COMPONENT 1
INPUT1
(MONO)
AUDIO VIDEO
R L R L
VIDEO INPUT
S-VIDEO
IN
(R) AUDIO (L) VIDEO
MONITOR
COMPONENT 2
DVD OUTPUT
/DTV
INPUT
A/V
S-VIDEO
COMPONENT 1
INPUT1
(MONO)
R AUDIO L VIDEO
VIDEO INPUT
or
B R S-VIDEO
DVD
(R) AUDIO (L)
13