Table of Contents
Advertisement
Compile the system
1. Compile your system by hitting the compile button in the standard Bar or select System > Compilation >
Compile active partition
Assign physical units to the imaginary units in the system design
1. If the server is already running an old configuration or you are unsure of its state it needs to be reset to become
available. Click the Device Maintenance button or go to System > Network > Perform Device Maintenance,
select the server and click the reset device button to the left.
2. Enter the Equipment table via System > equipment table
3. For both the server and the amplifier, click the cell in the serial number or host name column and select your
unit from the dropdown menu. Click OK
NOTE: If your online devices are not available in the equipment table please recheck item 1 in this section.
Send the configuration to the system
1. Click the Send configuration button on the network bar or select System > Network > Send configuration
2. Enter a system description or leave to default and click OK
3. Click Yes to start system audio
4. Click Start All in the Manage partition audio popup. Click close
Your system is now up and running and passing audio.
13. Quick Start Tutorial
D SERIES Tesira Quick Start Guide rev 1.2.0
19
Advertisement
Table of Contents
