Patch Tempo; Gk Set - Roland GR-55 Owner's Manual

Patch Settings (MASTER)
Tab Parameter
INT TRIG
INT TIME
ASSIGN
1–8
INT CURVE
WAVE RATE
WAVE FORM
*1 INT TRIG, INT TIME, and INT CURVE are used if SOURCE is set to "INT PDL. "
*2 WAVE RATE and WAVE FORM are used if SOURCE is set to "WAVE PDL. "

PATCH TEMPO

Group Parameter
PATCH TEMPO TEMPO

GK SET

Group Parameter
GK SET SELECT
58
Value Description
Specifies how the motion of the internal pedal will be triggered. *1
PATCH CHANGE Triggered when you switch patches.
CTL PDL Triggered when you operate the [CTL] pedal.
EXP LOW Triggered when you move the expression pedal to minimum.
EXP MID Triggered when you depress the expression pedal through the center value.
EXP HIGH Triggered when you move the expression pedal to maximum.
Triggered when you move the expression pedal to minimum while the expression pedal switch is
EXP ON LOW
on.
Triggered when you depress the expression pedal through the center value while the expression
EXP ON MID
pedal switch is on.
Triggered when you move the expression pedal to maximum while the expression pedal switch is
EXP ON HIGH
on.
EXP SW Triggered when you operate the expression pedal switch.
GK S1 Triggered when you operate the [S1] button of the GK pickup.
GK S2 Triggered when you operate the [S2] button of the GK pickup.
Specifies the time over which the internal pedal will move from the released (heel) position to the
0–100
depressed (toe) position. *1
Selects one of the following curves to specify the change produced by the internal pedal. *1
LINEAR
LINEAR,
SLOW RISE,
FAST RISE
Specifies the time for one cycle of the wave pedal. *2
If you choose BPM, the value of this parameter will be set according to the "PATCH TEMPO" (p. 58)
setting of each patch. This is an easy way to make the effect sound synchronize to the tempo of each
0–100, BPM
song.
* If the time determined by the tempo exceeds the allowable length, it will be set to
synchronize to 1/2 or 1/4 of that time .
Select one of the following to specify the change produced by the wave pedal. *2
SAW
SAW, TRI, SIN
Value
20–250
Value
SYSTEM, 1–10
SLOW RISE
TRIANGLE
Description
Specifies the tempo for tempo-synchronized effects.
If SYSTEM–MIDI/USB–GENERAL–MIDI SYNC (p. 79) is "ON, " the tempo is determined by
MIDI clock from an external device.
Description
Normally, you can leave this set to "SYSTEM. " If you swap guitars for different patches,
choose the GK SET you specified for the guitar you use with this patch.
FAST RISE
SINE