Sip Configuration Page - ETC CS-74 Administration & Setup Manual

2.6

SIP Configuration Page

The SIP Configuration page allows an administrator to configure the respective SIP channels or
lines of the device. Additionally lines can be set for different modes of operation, turned on or off,
etc, depending on specific application needs. See Figure 6 below.
Figure 6
'On' Check box – Allows the administrator to turn on or off the respective line. If turned off any
•
'line information' will not be displayed on the device.
Channels 1-4 – This field allows the administrator to assign a name to the respective channel.
•
This name will be displayed on the device. It is recommended to use upper case letters and
limit number of characters to 4 per channel.
SIP Server – This field allows the administrator to input the address of the SIP Server to which
•
the device will register with. Can be either DNS name or IP address. Each channel can be
configured to register with a different SIP Server if desired.
SIP Server 2 – This field allows the administrator to input the IP address of a backup SIP server
•
in the event the primary is not available.
SIP User – This field allows the administrator to assign an extension or SIP identifier for
•
registration.
SIP Password – This field allows the administrator to assign the SIP Password for registration.
•
Number to Dial – This field allows the administrator to assign an extension the device will dial.
•
Note: This function works in conjunction with specific 'Mode' selected
Auto Answer – If checked this option sets the device to automatically answer an incoming call
•
to the respective channel as assigned in the SIP User field.
available with specific 'modes'
CS-74 Administration and Set Up Guide Page 9 Essential Trading Systems Corp.
This option only becomes