Using The Settings Displays; Software Update]; Screen Settings] - Sony Blue-rayDisc BDP-BX120 Operating Instructions Manual

Using the Settings
Displays
• We recommend performing the software
update every 2 months or so.
• For information about update functions,
visit the following website:
http://www.sony.com/bluraysupport/
Select _ [Setup] on the home menu
when you need to change the settings of
the player.
The default settings are underlined.
1
Select _ [Setup] on the home
menu using,_/_.
2 Select the setupcategoryicon
usingt/4!,, and press ENTER.
[SoftwareUpdate]
• [Update via Internet]
Updates the player's software using
available network. Make sure that the
network is connected to the Internet. For
details, see "Step 2: Preparing for
Network Connection" (page 17).
• [Update via USB Memory]
Updates the player's software using
USB memory. Make sure that the
Sotiware Update Folder is correctly
named as "UPDATE" and all the update
files must be stored in this folder. The
player can recognize up to 500 tiles/
folders in a single layer including the
update files/folders.
[Screen Settings]
• [3D Output Setting] (BDP-S5200/
BX520 only)
[Auto]: Normally select this.
[Off]: Select this to display all content in
2D.
• [TV Screen Size Setting for 3D]
(BDP-S5200/BX520 only)
Sets the screen size of your 3D-
compatible TV.
• [TV Type]
[16:9]: Select this when connecting to a
wide-screen TV or a TV with a wide
mode limction.
[4:3]: Select this when connecting to a
4:3 screen TV without a wide mode
timction.
• [Screen Format]
[Full]: Select this when connecting to a
TV with a wide mode timction. Displays
a 4:3 screen picture in 16:9 aspect ratio
even on a wide-screen TV.
[Normal]: Changes the picture size to lit
the screen size with the original picture
aspect ratio.
28