Creative LabelTac 4 PRO Quick Start Manual page 4

C) LOADING MEDIA SUPPLY
1) Open cover using both
blue cover release tabs.
4) Feed the supply through
the alignment guides and
out through the mouth of
the printer.
(Video available on LabelTac 4 Install Disc)
2) Remove blue media
holder and place media on
holder, closing each end
with the arm cap.
5) Adjust the blue alignment
guides manually to fit the
width of the media
4
3) Replace media holder,
ensuring the media can turn
freely.
6) Disengage the cover
support and gently close the
top cover.