Table of Contents
Advertisement
Note: To extend battery life, use the previous procedure
to turn off Bluetooth when not in use. Your EWP will not
pair with devices until you set Bluetooth power back on
and pair your EWP with the devices again.
pair with a headset or handsfree
device
First time connectionof Bluetooth headset
Before you start:
• The headset must be charged prior to
starting.
• Bluetooth headset must be turned Off.
1 To turn on Bluetooth: press Start > Settings >
Connections > Wireless Manager and check
the Enable Bluetooth box box and press
Done. The O indicator appears in the Home
screen.
2 From the Home screen, press: Start > All
Programs > Bluetooth > Bluetooth Manager
> Hands-free.
3 Turn the headset on and place it in pairing mode
(Refer to the Bluetooth pairing instructions included
with the headset.). When using a Motorola headset,
press and hold the Call button of the headset for 5
seconds. The indicator light turns on and remains
steady. If the indicator light is flashing or does not
remain steadily lit, turn off/on the headset and
repeat this step.
4 Press: Add. The EWP prompts you to verify your
device is ready.
5 Press: Search. The EWP starts searching for your
headset and shows it on the screen.
6 Press: Select to connect the headset.
7 When prompted, enter the device passkey provided
with your headset (such as 0000) and press
Accept.
connections
71
Advertisement
Table of Contents
