Table of Contents
Advertisement
lock & unlock EWP
You can manually lock your EWP to prevent
accidental keypresses.
To lock your EWP, press and hold X until
the Quick List opens. Then, select Lock. Your
left soft key becomes Unlock.
To unlock your EWP, press Unlock and enter
your password. Your EWP uses * if you have
not set a password.
To keep others from using your EWP,
change your password:
Find it: From the home screen, press: Start
> Settings > Security > Device Lock
1 Check the Prompt if device unused for
checkbox, and select the amount of time for the
EWP to be inactive before automatically locking.
2 Choose a password type that is either simple
basics
32
(4-digit number) or strong alphanumeric.
Note: A hard-to-guess password consists of at
least 7 characters, including uppercase and
lowercase letters, numerals, and punctuation.
3 Enter and confirm your password.
4 Press Done.
To unlock the EWP, press Unlock. When you
see the unlock prompt, enter your password
and press Done.
Tip: Choose a password you will remember. Without
your password, you can reset your EWP, but it will result
in the loss of your personalized settings and all content
stored in the EWP memory. To perform a hard reset,
hold down the center key s for 5 seconds while
turning the EWP on.
Note: A locked EWP still rings or vibrates for incoming
calls. You do not need to unlock the EWP to answer.
Advertisement
Table of Contents
