Table of Contents
Advertisement
- Press & Release: Press and release the
Scan key to trigger bar code scanning.
• To change the Aiming Mode, select:
- Normal: When the Scan key is pressed, a red
cross pattern is shown on the screen. The bar
code is automatically scanned upon detection.
- Aim First: When the Scan key is pressed, a
red cross pattern is shown on the screen. Upon
detection of a bar code, the cross turns to
green. Press the Scan key to capture the bar
code.
• To change the Aiming Pattern, select:
- Target Mark: The EWP displays cross
pattern on the screen to help you aim at the bar
code.
- Aimer LED: The EWP projects a red line of
light to help you aim at the bar code.
- Off: No aimer pattern.
• To project flash illumination from the EWP
during bar code scan, check the Illumination
box.
bar code capture
69
Advertisement
Table of Contents
