Fron T Hub Bearing Replacing - Microcar MC1 Technical Manual

BACK HUB
BEARING CHANGE
Put the car on an elevator
Take off the back wheel
(set screw 60N/m)
Take out the brake pads (see page 88)
WIth a 6 sides key, take out the 2 fixing screw of the
back caliper.
Take out the caliper of the disc.
Take out the central fixing of the hub
Set screw when fitting back 120N/m)
With a hub puller, take out the back hub
Replace the bearings
The fitting back is made at the reverse from the removal
operations.
94