Engine Cradle Removal - Microcar MC1 Technical Manual

ENGINE CRADLE REMOVAL

• Remove the front bumper (see page 19).
• Remove the soundproof engine (see page 58).
• Remove the 2 doors (see page 8)
• Remove the 2 front wings (see page 20).
• Remove the 2 light optics (see page 22).
• Unplug the 2 heating hoses.
• Find and take out the 2 fuel feed hoses.
• Unplug the accelerator cables.
• Unplug the the changer bridge.
• Uncouple the tube of the exhaust manifold
• Take off the air induction duct
• Take off the exhaust fixing tube on the engine housing.
• Unplug the opening bonnet cable
• Uncouple the rack of the steering column (see page 96).
• Unplug the rigid tubes at the joint of front brakes fuses.
• Take out the windscreen washer tube.
• Unplug all the electric feed cables betwen the body and the engine cradle.
• Place the car on an elevator ar on a chassis stand.
• Take out the front wheels.
• Put a trolley under the engine cradle and chock the cradle.
Unplug the battery using the red speed disconnecting (+)
cable terminal.
76