Fr Ont Hub Bearing Replacing - Microcar MC1 Technical Manual

FRONT HUB
BEARING CHANGING
Lift up the car on an elevator
Take off the wheel
Take off the brake pads (see page 88)
With a 6 sides key, take off the 2 fixing screws of the brake caliper
Take off the fixing nut of the steering joint.
(set screw when fitting back 22N/m)
Take out the steering joint, use a hub puller
FACOM Réf. U16B.
Take out the fixing nut hub of the lower pivot
(set screw when fitting back 40N/m)
With a hub puller FACOM Réf. U16B, uncouple
the hub from the suspension triangle.
90