Input Panel; Audio Connections - JBL LSR305 Owner's Manual

Input Panel

10. XLR INPUT – Connect professional equipment using an XLR connector.
11. 6 mm (¼") INPUT - Connect equipment using a 6 mm (¼") balanced or unbalanced connector.
12. INPUT SENSITIVITY SWITCH – Set this switch to +4 dBu to protect from overload when connecting to
professional equipment and sources with very high output.
13. LOW FREQUENCY TRIM – Allows boost or attenuation of low frequency output by 2 dB.
14. HIGH FREQUENCY TRIM – Allows boost or attenuation of high frequency output by 2 dB
15. VOLUME CONTROL – Use this control to set the maximum listening level.
16. POWER RECEPTACLE – Connection for the power cord
17. POWER SWITCH – Activates power for the system.
10
11
13
14
16

Audio Connections

Connect signal sources to either the XLR or 6 mm (¼") INPUT CONNECTORS. Connect only a single signal source
to the speaker using either XLR INPUT CONNECTOR, OR the 6 mm (¼") TRS INPUT CONNECTOR. Do not
connect multiple signal sources to multiple sources of the same speaker simultaneously.
12
15
17
9