Rear Wiper - CITROËN C4 Owner's Handbook Manual

Special position of the
windscreen wipers
This position permits release of the
windscreen wiper blades.
It is used for cleaning or replacement
of the blades. It can also be useful, in
winter, to detach the blades from the
windscreen.
 Any action on the wiper stalk in the
minute after switching off the igni-
tion places the blades vertically on
the screen.
 To park the blades again, switch on
the ignition and operate the wiper
stalk.
To maintain the effectiveness
of the "fl at-blade" type of wiper
blades, it is advisable to:
- handle them with care,
- clean them regularly using
soapy water,
- avoid using them to retain
cardboard on
screen,
- replace them at the fi rst signs
of wear.
V I S I B I L I T Y

Rear wiper

If a signifi cant accumulation of
snow or ice is present, or when
using a tailgate bicycle carrier,
deactivate the automatic rear
wiper via the vehicle confi gura-
tion menu.
the wind-
B. Rear wiper selection ring: turn the
ring to place the desired symbol
against the marking.
Park.
Intermittent wipe.
Wash-wipe.
Turn the ring to its stop/the rear
screen wash, then the rear wiper
operates for a set duration.
Reverse gear
When reverse gear is engaged, the
rear wiper will come into operation if the
windscreen wipers are operating.
Programming
The function is activated or de-
activated via the vehicle confi gu-
ration menu.
This function is activated by de-
fault.
5
109