Storing Formats - Dymo LabelPoint 250 User Manual

The first of the memory fields is displayed.
3. Use the arrow keys to move through the fields. You
can store new text in any of the memory locations,
however, if you select a location that is filled, the
previous label text will be overwritten.
4. Select a memory location and press
Your label text is saved and you are returned to the
label.

Storing Formats

In addition to label text, you can store up to nine
specific label formats you use frequently. This feature
stores only the formatting information not the label
text.
To store the current format
1. Press + .
2. Select Save and then Format.
The first of the memory fields is displayed.
3. Use the arrow keys to move through the fields. You
can store a new format in any of the memory
locations, however, if you select a location that is
filled, the previously stored format will be
overwritten.
4. Select a field and press
appears in the field.
5. Enter a name for the format and press
label format is saved and you are returned to the
label.
Recalling Labels and Formats
You can easily recall labels and formats stored in
memory to use at a later time.
To recall labels or formats
1. Press + .
10
.
. The word Name?
. The
2. Select Recall and then Label, Format, or Last
Printed.The first memory location is displayed
similar to storing a label or format.
3. Select a label or format to recall and press
Caring for Your Labelmaker
Your labelmaker is designed to give you long and
trouble-free service, while requiring very little
maintenance.
Clean your labelmaker from time to time to keep it
working properly. Clean the cutter blade each time you
replace the label cassette.
To clean the cutter blade
1. Remove the label cassette.
2. Press and hold down the cutter lever to expose the
cutter blade.
3. Use a cotton ball and alcohol to clean both sides of
the blade.
4. Release the cutter lever.
!
You can also follow this procedure if the cutter
blade becomes lodged in the forward position and will
not move.
To clean the print head
♦
Clean the print head using the cleaning tool located
inside the label compartment lid.
.