Motorola Timeport User Manual page 147

Troubleshooting
Problem Solution
I tried to place a Your call did not reach the wireless
call and heard an system. You may have dialed the
alternating high/ number too soon after turning the
low tone. phone on. Wait until the display says
Ready
I cannot send/ Make sure that your antenna is fully
receive calls. extended and that you have a phone
signal (see the "Signal Strength
Indicator" item on page 25). Avoid
electrical or radio interference, and
obstructions such as bridges, parking
garages, or tall buildings.
Your phone also may have the
Restrict Calls
you know the unlock code, you can
change this setting in the security menu
M
(
My phone has Make sure that your antenna is fully
poor reception extended and is not bent or damaged.
and drops calls.
Also, make sure you have a phone
signal (see the "Signal Strength
Indicator" item on page 25). Stay clear
of any obstructions such as bridges,
parking garages, or tall buildings.
before making a call.
feature turned on. If
Settings Security
> > ).
145