Intrusion Sensor - Toyota AURIS User Manual

1-7. Theft deterrent system
 Deactivating or stopping the alarm
Do one of the following to deactivate or stop the alarm:
 Unlock the doors using the entry function or wireless remote
control.
 Start the hybrid system. (The alarm will be deactivated or
stopped after a few seconds.)

Intrusion sensor

The intrusion sensor detects an intruder or movement in the vehicle.
The intrusion sensor can be canceled using the cancel switch.
This system is designed to deter and prevent vehicle theft but does
not guarantee absolute security against all intrusions.
 Canceling the intrusion sensor
To set the alarm with the intrusion sensor disabled, the alarm must be
set within 5 minutes after canceling the sensor.
116
UK_AURIS_HV_EE
Turn the "POWER" switch off
and press the intrusion sensor
"OFF" switch.
A message will be shown on the
multi-information display in the
instrument cluster. Pressing the
switch again will re-enable the
intrusion sensor.