Toyota AURIS User Manual page 477

STEP 3
Connect the jumper cables.
Exclusive jump starting terminal on your vehicle
Positive (+) battery terminal on the second vehicle
Negative (-) battery terminal on the second vehicle
Connect the jumper cable to ground on your vehicle as shown in
the illustration.
Start the engine of the second vehicle. Increase the engine
STEP 4
speed slightly and maintain at that level for approximately 5
minutes to recharge the 12-volt battery of your vehicle.
Maintain the engine speed of the second vehicle and turn
STEP 5
the "POWER" switch to ON mode, then start the vehicle's
hybrid system.
Make sure the "READY" indicator comes on. If the indicator
STEP 6
does not come on, contact at any authorized Toyota dealer
or repairer, or another duly qualified and equipped profes-
sional.
UK_AURIS_HV_EE
5-2. Steps to take in an emergency
5
477