No Picture; No Sound; Remote Control - Does Not Operate; Input Sources - Can Not Be Selected - Sharp LC-32LE352E-BK Operation Manual

No picture

1. No Picture means that your TV is not receiving a
transmission. Have you selected the correct button on
the remote control? Try once more. Also make sure
the correct input source has been selected.
2. Is the aerial connected properly?
3. Are the plugs connected tightly to the aerial socket?
4. Is the aerial cable damaged?
5. Are suitable plugs used to connect the aerial?
6. If you are in doubt, consult your dealer.

No sound

1. Has the TV been set to mute? To cancel mute,
press the " " button, or increase the volume level.
2. Sound is coming from only one speaker. Is the
balance set to one extreme? See Sound Menu
section.

Remote control - does not operate

Your TV no longer responds to the remote control. The
batteries may be exhausted, if so you can still use the
control buttons on the TV. (* Is only possible if they
are not blocked by parental control.)

Input sources - can not be selected

1. If you cannot select an input source, it is possible
that no device is connected.
2. Check the AV cables and connections if you have
tried to connect a device.

Recording Unavailable

To record a programme, you should fi rst connect
a USB disk to your TV while the TV is switched
off. You should then switch on the TV to enable
recording feature. Otherwise, recording feature will
not be available. If you cannot perform recording, try
switching off the TV and then re-inserting the USB
device while the TV is switched off.

USB Is too Slow

If "USB is too slow" message is displayed on the
screen while starting a recording, try restarting
the recording. If you still get the same error, it is
possible that your USB disk does not meet the speed
requirements. Try connecting another USB disk.
A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_32205LED_39205LED_GOLD19_10081423-10081425-10082975-10083449_50231035_basic IB.indd 28 A01_[GB]_mb95_4847uk_DVBT_C_S2_DLNA_HBBTV_MMH_32205LED_39205LED_GOLD19_10081423-10081425-10082975-10083449_50231035_basic IB.indd 28
Internet Connection Not Available / DLNA
Mode Not Operating
If the MAC address (a unique identifi er number) of
your PC or modem has been permanently registered,
it is possible that your TV might not connect to
the internet. In such a case, the MAC address is
authenticated each time when you connect to the
internet. This is a precaution against unauthorized
access. Since your TV has its own MAC address,
your internet service provider cannot validate the MAC
address of your TV. For this reason, your TV cannot
connect to the internet. Contact your internet service
provider and request information on how to connect
a different device, such as your TV, to the internet.
It is also possible that the connection may not be
available due to a firewall problem. If you think
this causes your problem, contact your internet
service provider. A fi rewall might be the reason of a
connectivity and discovery problem while using the TV
in DLNA mode or while browsing via DLNA.

Invalid Domain

Ensure that you have already logged on to your PC
with an authorized username/password and also
ensure that your domain is active, prior to sharing
any fi les in your DLNA server program on your PC. If
the domain is invalid, this might cause problems while
browsing fi les in DLNA mode.
English - 28 -
29.01.2013 18:37:55 29.01.2013 18:37:55