Amana AER5830VAW Installation Instructions Manual
Amana AER5830VAW Installation Instructions Manual

Amana AER5830VAW Installation Instructions Manual

30" (76 cm) freestanding electric ranges
Hide thumbs Also See for AER5830VAW:

Advertisement

30" (76 CM) FREESTANDING ELECTRIC RANGES
IMPORTANT:
Save for local electrical inspector's use.
W10252706B
INSTALLATION INSTRUCTIONS

Table of Contents

RANGE SAFETY ................................................................................... 2
INSTALLATION REQUIREMENTS ...................................................... 3
Tools and Parts .................................................................................. 3
Location Requirements ...................................................................... 3
Electrical Requirements - U.S.A. Only ............................................... 4
INSTALLATION INSTRUCTIONS ........................................................ 6
Unpack Range.................................................................................... 6
Install Anti-Tip Bracket....................................................................... 6
Electrical Connection - U.S.A. Only ................................................... 7
Verify Anti-Tip Bracket Location ...................................................... 12
Level Range...................................................................................... 12
Storage Drawer ................................................................................ 12
Complete Installation ....................................................................... 13
Moving the Range ............................................................................ 14
ANTI-TIP BRACKET TEMPLATE ..................................................... 15

Advertisement

Table of Contents
loading

Summary of Contents for Amana AER5830VAW

  • Page 1: Table Of Contents

    INSTALLATION INSTRUCTIONS 30" (76 CM) FREESTANDING ELECTRIC RANGES Table of Contents RANGE SAFETY ................... 2 INSTALLATION REQUIREMENTS ............3 Tools and Parts .................. 3 Location Requirements ..............3 Electrical Requirements - U.S.A. Only ..........4 INSTALLATION INSTRUCTIONS ............6 Unpack Range..................6 Install Anti-Tip Bracket...............
  • Page 2: Range Safety

    RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...
  • Page 3: Installation Requirements

    INSTALLATION REQUIREMENTS Tools and Parts Location Requirements Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. Read and follow the instructions provided with any tools listed It is the installer’s responsibility to comply with installation here.
  • Page 4: Electrical Requirements - U.s.a. Only

    Product Dimensions A. 13" (33.0 cm) max. upper cabinet depth B. 30" (76.2 cm) min. opening width C. For minimum clearance to top of cooktop, see NOTE*. D. 30¹⁄₈" (76.5 cm) min. opening width E. Outlet - 8" (20.3 cm) to 22" (55.9 cm) from either cabinet, 5¹⁄₂"...
  • Page 5 Electrical Connection If connecting to a 4-wire system: To properly install your range, you must determine the type of This range is manufactured with the ground connected to the electrical connection you will be using and follow the instructions neutral by a link. The ground must be revised so the green provided for it here.
  • Page 6: Installation Instructions

    INSTALLATION INSTRUCTIONS Unpack Range Install Anti-Tip Bracket WARNING WARNING Excessive Weight Hazard Use two or more people to move and install range. Failure to do so can result in back or other injury. 1. Remove shipping materials, tape and film from range. 2.
  • Page 7: Electrical Connection - U.s.a. Only

    5. To mount anti-tip bracket to wood floor, drill two ¹⁄₈" (3.2 mm) 6. Align anti-tip bracket holes with holes in floor. Fasten anti-tip holes at the positions marked on the bracket template. bracket with screws provided. Remove template from floor. To mount anti-tip bracket to concrete or ceramic floor, use a ³⁄₁₆"...
  • Page 8 4. Add strain relief. Electrical Connection Options Style 1: Power supply cord strain relief If your home has: And you will be Go to Section: connecting to: Remove the knockout for the power supply cord. Assemble a UL listed strain relief in the opening. 4-wire receptacle A UL listed, 4-wire connection:...
  • Page 9 3. Feed the power supply cord through the strain relief on the 3-wire connection: Power Supply Cord cord/conduit plate on bottom of range. Allow enough slack to easily attach the wiring to the terminal block. Use this method only if local codes permit connecting chassis ground conductor to neutral wire of power supply cord.
  • Page 10 3. Pull the wires through the strain relief on bottom of range. Direct Wire Installation: Copper or Aluminum Wire Allow enough slack to easily attach wiring to the terminal block. This range may be connected directly to the fuse disconnect or circuit breaker box.
  • Page 11 6. Use ³⁄₈" nut driver to connect the neutral (white) wire to the 2. Attach terminal lugs to line 2 (red), bare (green) ground, and center terminal block post with one of the 10–32 hex nuts. line 1 (black) wires. Loosen (do not remove) the setscrew on the front of the terminal lug and insert exposed wire end through bottom of terminal lugs.
  • Page 12: Verify Anti-Tip Bracket Location

    Verify Anti-Tip Bracket Location Storage Drawer 1. On models with a storage drawer, remove storage drawer. The storage drawer can be removed. Before removing, check See the “Storage Drawer” section. that the storage drawer is cool and empty. A flat-blade screwdriver will be needed for removal.
  • Page 13: Complete Installation

    To Replace: Complete Installation 1. Lift up the back of the storage drawer and place it inside the range in its fully forward position. 1. Check that all parts are now installed. If there is an extra part, 2. Lift up the front of the storage drawer to a level position. go back through the steps to see which step was skipped.
  • Page 14: Moving The Range

    Moving the Range For direct-wired ranges: WARNING WARNING Electrical Shock Hazard Tip Over Hazard A child or adult can tip the range and be killed. Disconnect power before servicing. Replace all parts and panels before operating. Connect anti-tip bracket to rear range foot. Failure to do so can result in death or electrical shock.
  • Page 15: Anti-Tip Bracket Template

    ANTI-TIP BRACKET TEMPLATE Cut on dotted lines and place the left edge against the left side cabinet and the top edge against the rear wall. Top edge...
  • Page 16 W10252706B © 2009. 9/09 All rights reserved. Printed in U.S.A.

Table of Contents