Lincoln Electric PRO-CUT 25 Service Manual page 77

F-45
FAN REMOVAL AND REPLACEMENT (continued)
7. Using a phillips head screwdriver,
remove the four mounting screws on
the four corners of the fan. The fan
will become free.
8. After replacement of the fan, replace
the four mounting screws located at
the corners of the fan.
9. Reconnect labeled leads to the
top of the fan. Be sure to replace
leads in their proper positions.
10. Replace the case wraparound.
11. Replace the plastic nut from around the
pressure regulator.
Do Not Over tighten.
12. Replace the carry handle.
TROUBLESHOOTING & REPAIR
PRO-CUT 25
F-45