Setting Up Your Flash; Installing The Batteries - Platinum PT-DFLEXT1C User Manual

Setting up your flash

Installing the batteries

Cautions
Notes
1 Open the battery compartment cover by pressing it with your thumb, sliding
the compartment down, then lifting it open.
2 Insert four (4) AA batteries (not included). Make sure that the + and – match
what is indicated in the compartment.
• Using AA batteries other than Alkaline or NiMH may
cause improper battery contact due to the irregular
shape of the battery contacts.
• If you change the batteries after firing many flashes
continuously, be aware that the batteries might be hot.
• Make sure that all four batteries are the same brand and
type.
• When replacing the batteries, replace all four at one
time.
• Batteries are not included with this flash.
E-TTL II AUTO FLASH FOR CANON™
7