Using Manual Flash (M); Using Stroboscopic (Multi) Flash - Platinum PT-DFLEXT1C User Manual

Using manual flash (M)

The flash output is adjustable from full power to 1/128th power in 1/3rd step
increments. Use a hand-held flash meter to determine the required flash output to
obtain a correct flash exposure when using manual flash.
1 Press the MODE button repeatedly until the M is displayed on the LCD panel.
2 Press the SET button to set the flash output.
LCD panel.
3 Press the - button to set a lower value, or the + button to set a higher value.
4 Press the SET button again to lock the settings.
5 Press the shutter button halfway to see the effective

Using stroboscopic (multi) flash

Using stroboscopic flash, a rapid series of flashes is fired. This can be used to capture
multiple images of a moving subject in a single photograph.
You can set the firing frequency (number of flashes per second, expressed as Hz), the
number of flashes, and the flash output.
1 Press the MODE button repeatedly until "Multi" is displayed on the
1 / 128
M
0.5 0.7 1 1.5 2 3 4
1.7 2.3 4 5 7 10 15 20 30 40 60
35
Zoom mm F
1 / 16
2
Multi
0.5 0.7 1 1.5 2 3 4
1.7 2.3 4 5 7 10 15 20 30 40 60
35
Zoom
mm
E-TTL II AUTO FLASH FOR CANON™
m
6 9 13 18
ft
56
The flash output blinks on the
flash range displayed.
1
Hz
m
6 9 13 18
ft
LCD panel.
17