Back View - Platinum PT-DFLEXT1C User Manual

Back view

# Item
1 Bounce angle indicator
2 LCD panel
3 ZOOM button
4 MODE button
5
6 /
7 button
/
8 button
9 Battery compartment cover Slide open to install or replace the batteries.
10 Flash-ready indicator/TEST
button
11 Power switch
Description
Indicates the angle of head tilt, when used for bounce flash. See "Using bounce flash" on
page 14.
Displays setting and status information. See "LCD panel" on page 6.
Press to zoom the flash head out or in. See "Using ZOOM to set the flash coverage" on
page 15.
Press to change the flash mode. See "Using E-TTL II autoflash in the shooting modes" on
page 11.
Press once to light the LCD panel.
Press to select the previous or next item. Also press to decrease or increase the setting.
Press to select or set an option.
Press to set high-speed sync (FP flash) (see "Using the High-speed Sync" on page 13) or the
second curtain sync (see "Using second-curtain sync" on page 20).
Lights red when the flash is ready to use. Press to fire a test flash.
Caution: Do not look closely at the flash window or point it at someone's eyes at close
range.
Slide to the right to turn the flash on. Slide to the left to turn the flash off.
E-TTL II AUTO FLASH FOR CANON™
10
11
5