Summary of Contents for The Fireplace Jetmaster 850
Page 1
WitH tHe nZ Gas act 1993 and all releVant Gas installation standards and local autHority BylaWs. The Fireplace Ltd reserves the right to alter or amend the specifications due to improvements or otherwise of this fireplace without further notice.
Page 2
Steel. The bottom frame is 20mm in width and is a strengthening stiffener as well as a finishing detail. the burner is a standard Jetmaster 850 sFB constructed entirely of Stainless Steel including the burner frame, front panel and cover plate (but excluding the valve and operating components of the burner). Operation of the burner is manual ignition and flame control, with a standing pilot.
Page 3
A floor protector (hearth) is not required for a timber deck in front of the fire. • Slide the Jetmaster 850 BROFF Firebox into place inside the Hebel Heat cell, ensuring it is centralized. Take note that the thickness of the outer surface material must be taken into consideration and allowed for before the firebox is secured to the Hebel base and framing.
Page 4
A floor protector is not required for any installations above a timber floor. • All Jetmaster 850 Bedrock Outdoor Gas fires are supplied standard with a SS weather cover that fits over the front opening of the firebox with two locking handles on the sides. Refer to Fig. 4.