Vax Impact 502 Let's Get Started page 3

Hide thumbs Also See for Impact 502:
Table of Contents

Advertisement

Don't attempt to remove blockages
8
with sharp objects as this may cause
damage to your vacuum cleaner.
Don't vacuum up hard or sharp
8
objects such as glass, nails, screws or
coins etc.
Turn off all controls on the vacuum
3
cleaner before disconnecting or
connecting the power cord.
Always keep the power cord away
3
from the brushes, heated surfaces
and open flames whilst using your
vacuum cleaner.
After use always wrap the power
3
cord around the cord clips provided.
Always make sure the filters are in
3
place before use.
Always switch off the vacuum
3
cleaner before disconnecting or
connecting the hose and accessories.
Keep all openings clear and free
3
from debris as this may affect the
airflow/suction.
This vacuum cleaner is fitted with a
3
constantly rotating brush bar. To avoid
damage to your flooring, make sure
Don'ts
Don't use the vacuum cleaner with
8
incorrect voltage as this may result
in damage or injury to the user. The
correct voltage is listed on the
ratings label.
Do's
the brush bar is raised to the highest
setting when using the accessories
and when using on stairs.
Always take extra care when
3
positioning the vacuum cleaner on
the stairs.
Always replace the fuse in the plug
3
with a 13amp fuse.
Use only CE approved 13amp extension
3
cords, non-approved extension cords
may overheat. Care should be taken to
arrange the extension cord as it can be
a trip hazard.
Store your vacuum cleaner in a cool,
3
dry area. If filters have been cleaned
as per user guide instructions
ensure they are thoroughly dry
before storing away.
Please keep instructions for
further use.

Advertisement

Table of Contents
loading

Table of Contents