Table of Contents
Advertisement
Cleaning the separator
Turn separator
Tap separator over
anti-clockwise
a bin to remove any
to 'unlock', pull
dirt/debris.
to remove.
Cleaning the post motor filter
Press post motor
filter cover clip, pull
to remove.
Storing your vacuum cleaner
Wrap the power
around the quick
cord release hooks.
Taking care of your machine
Using a soft brush
clean any dirt/debris
out of the separator.
Remove post
motor filter.
Press handle
release button.
Line up tabs on
separator with dirt
container, turn
separator clockwise
to 'lock' and click
into place.
Remove any dirt/
debris. Rinse under
water (max 40°C).
Lower handle
downwards.
The separator
should sit on seal
in bottom of dirt
container when
correctly fitted.
Leave to dry for 24
hours or until fully dry
before placing back in
the vacuum cleaner.
Always use the carry
handle to lift and carry
the machine.
Advertisement
Table of Contents
