Ant/Cable Service Hookup - LG 30FZ4D Owner's Manual

Antenna / Cable Service Hookup
Connect an antenna and/or cable service to
1
your TV as shown.
Turn to page 21 to do a channel search
2
with EZ Scan.
If you receive your RF signal through an
antenna that is several years old and con-
nects with two small prongs, you will need to
purchase a 300 to 75 ohm adapter. It should
be available from your local
electronics dealer.
We recommend using a 75 ohm cable for
your antenna connection in order to prevent
interference.
Mini glossary
TV OVER-THE-AIR SIGNALS
CATV CABLE SIGNALS
Combined signals
TV/CATV/DTV Over-the-air, cable, and digital over-the-air signals
TV/CATV/CADTV Over-the-air, cable, and digital cable signals
CAUTION : If you are not sure of the type of signal(s) you are receiving, let EZ Scan complete all the channel signal-type searches. The TV will let
you know when the analog, cable, and digital channel scans are complete.
For best signal reception, it is recommended to have your Antenna professionally adjusted.
DTV DIGITAL OVER-THE-AIR SIGNALS
CADTV DIGITAL CABLE SIGNALS
Cable TV
Wall jack
Antenna
RF coaxial wire
(75 ohm)
CALIBRATION
CABLE ANTENNA
+75 Ω +75 Ω
DIGITAL
AUDIO OUTPUT
OPTICAL
DIGITAL
AUDIO INPUT
OPTICAL
(DVI)
RF coaxial wire
(75 ohm)
P A G E 9