Turning The Tv On; On-Screen Displays - LG 30FZ4D Owner's Manual

Turning the TV On

First, connect antenna cable and power cord correctly. At this moment, the TV switches to standby mode.
1
In standby mode to turn TV on, press the POWER, CH +/-, TV/VIDEO, FRONT or number buttons on the
remote control or TV/VIDEO or CH
2
Select the viewing source by using TV/VIDEO, COMP, FRONT or HDMI button on the remote control.
This TV is programmed to remember which mode it was last set to, even if you turn the TV off.
Note: See page 21 if you have not auto programmed the TV to receive channels in your local broadcast area.
3
When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
If you will be away on vacation, disconnect the power plug from the wall power outlet.

On-Screen Displays

This page describes your on-screen display and information banner options.
Mute
Appears when
sound is muted.
P A G E 2 0
D E
/ on the TV.
Mute 10
Volume
Volume level is displayed
while adjusting the sound.
Channel Display
Displays current channel number.
TV 2-0
MONO
10:00 AM
Time
Appears when pressing the
enter button on remote control.
Channel Label
Displays current
channel label.