Advertisement
Advertisement
Troubleshooting
Also See for LG 30FZ1DC, 32FZ1DC-UB
Related Manuals for LG 30FZ1DC, 32FZ1DC-UB
-
CRT TV LG 30FS4D Owner's Manual
Color television (60 pages)
-
CRT TV LG 29FS2AMB/ANX Service Manual
Lg color tv service manual (40 pages)
-
CRT TV LG DU-27FB32C Installation And Operating Manual, Warranty
27" crt tv (60 pages)
Summary of Contents for LG 30FZ1DC, 32FZ1DC-UB
-
Page 1
LG Electronics U.S.A., Inc. Color television OWNER’S MANUAL 30FZ1DC MODELS: 32FZ1DC-UB TruSurround XT Please read this manual carefully and completely before operating your TV. Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below.
-
Page 2: Safety Warnings
Do not attempt to modify this product in any way without written authorization from Zenith Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is: LG Electronics U.S.A., Inc 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 1-800-243-0000 http://www.lgusa.com...
-
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa- ratus.
-
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
-
Page 5: Table Of Contents
Table of Contents Safety Warnings ......2 Important Safety Instructions ....3-4 Step 1.
-
Page 6: Front Panel Controls
Front Panel Controls - Here shown may be somewhat different from your TV. power Standby indicator (Illuminates brightly when the TV is in standby mode. Dims when the TV is switched on.) Remote control sensor TV/VIDEO menu vol left/ right Volume( ) button increases the sound level and vol- ume(...
-
Page 7: Rear Connections Panel
Rear Connections Panel - Connecting external equipment to your TV. - Here shown may be somewhat different from your TV. CALIBRATION Digital Audio Output Optical DIGITAL Connects to external AUDIO OUTPUT audio equipment OPTICAL like a home theater system. DIGITAL AUDIO INPUT Digital Audio Input OPTICAL...
-
Page 8: Front Connections Panel (front Video)
Front Connections Panel There are four jacks on the lower-right front front of your TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the Front connection panel (Front Video).
-
Page 9: Ant/cable Service Hookup
Antenna / Cable Service Hookup Connect an antenna and/or cable service to your TV as shown. Turn to page 19 to do a channel search with EZ Scan. If you receive your RF signal through an antenna that is several years old and con- nects with two small prongs, you will need to purchase a 300 to 75 ohm adapter.
-
Page 10: Cable Box Connections
Cable Box Connections Locate the output jack on the back of your cable box. Connect this to the Cable jack on the back of your TV. Or find the composite video and audio jacks on the back of your cable box, and connect them following the instructions provided with your equipment.
-
Page 11: Vcr Connections
VCR Connections Locate the Cable jack on the back of your TV. Connect this to out jack on the back of your VCR. Or find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment.
-
Page 12: Dvd Player
DVD Player Find the component or S-Video jacks for video connections, depending on your DVD connec- tors. Then make the correspond- ing audio connections. See the diagram for either set up. You may connect either the composite video or the S-Video cables to your TV.
-
Page 13: Set-top Box Hookup
Set-top box Hookup Find the audio and Y, P jacks or HDMI/DVI output port on the back of your set-top box and connect them fol- lowing the instructions provided with your equipment. Connect these cables to your TV as shown. The DTV shows the sharpest picture in 720p/1080i mode.
-
Page 14: Digital Audio Output
Digital Audio Output Send the TV’s audio out to external audio equipment (stereo system) via the Digital Audio Output Optical port. Connect one end of an optical cable to the TV Digital Audio Optical Output port. Connect the other end of the optical cable to the digital audio optical input on the audio equipment.
-
Page 15: Hdmi
HDMI - HDMI , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." - This DTV can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI). - This DTV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for DTV(480p, 720p, 1080i) modes. - When you Connect with HDMI Source Devices (DVD Player or Set Top Box) supporting Auto HDMI function, automatically, support Plug &...
-
Page 16: Remote Control Functions In Tv Mode
Remote Control Functions in TV Mode MODE Selects the remote operating mode: TV, VCR, Cable, DVD or Satellite. Select other operating modes, for the remote to operate external devices. VIDEO1 Selects the Video1 input source. MUTE Switches the Mute or the EZ mute. Mute: The sound is off.
-
Page 17: Remote Control Functions In Tv Mode
Remote Control Functions in TV Mode VIDEO2 Selects the Video2 input source. COMP1 Selects the Component 1 input source. NUMBER KEYPAD For direct channel selection and programming functions. DASH(-) Is used to enter a program num- ber for multiple program channels such as 2-1,2-2,etc.
-
Page 18: Turning The Tv On
Turning the TV On First, connect antenna cable and power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the POWER, CH +/-, TV/VIDEO, FRONT or number buttons on the remote control or TV/VIDEO or CH Select the viewing source by using TV/VIDEO, COMP, FRONT or HDMI button on the remote control.
-
Page 19: Setup Menu
EZ Scan (Channel Search) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Use pages 9-14 to connect external equipment to your TV. If you have done so, plug in your TV to a standard 120V, 60Hz power outlet.
-
Page 20: Channel Edit
Channel Edit Create two different types of channel lists in memory: “Custom list” and “Favorite channel list” from the default channel list made in the EZ scan menu. A custom list can be created by toggling each channel on or off with the (Enter) key.
-
Page 21: Dtv Signal
DTV Signal Lets you know how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience degradation. Using the SIGNAL button Press the SIGNAL button on the remote control.
-
Page 22: Channel Label Setup
Channel Label Setup Choose preset labels for your channels. Use Channel +/- on your remote control in the Ch Label menu to select a channel for labeling, and choose a suit- able label for your channel by pressing label to the selected channel. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the SETUP menu.
-
Page 23: Input Source Selection
Input Source Selection Note: Changes the picture source for the screen so you can watch your on-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. Using the TV/VIDEO, FRONT, COMP1-2 and HDMI button Use the TV/VIDEO, FRONT, COMP1-2, and HDMI button to select the input source.
-
Page 24: Video Menu
VIDEO Menu Each video menu adjustment doesn’t effect other input sources. Readjust Video menu for each input source. EZ Picture This function adjusts the TV to the best picture appear- ance. Select the preset value in the EZ Picture menu based on the program category.
-
Page 25: Manual Video Control
VIDEO Menu Manual Video Control Adjust the picture appearance to suit your preference and viewing situations. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the VIDEO menu. Press the RIGHT arrow button to access the VIDEO menu.
-
Page 26: Color Temperature
Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. - XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm.
-
Page 27: Audio Menu
AUDIO Menu Audio Language Other languages may be available only if a digital signal is being sent by the broadcasting station. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the AUDIO menu. Press the RIGHT arrow button to access the AUDIO menu.
-
Page 28: Stereo/sap Broadcasts Setup
AUDIO Menu Stereo/SAP Broadcasts Setup This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, MONO, STEREO, or SAP appear in turn.
-
Page 29: Manual Sound Control
AUDIO Menu Manual Sound Control Adjust the sound to suit your taste and room situations. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the AUDIO menu. Press the RIGHT arrow button to access the AUDIO menu.
-
Page 30: Front Surround
AUDIO Menu is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Front Surround Using the SURROUND button Use the SURROUND button to select Front Surround option.
-
Page 31: Auto Clock Setup
Auto Clock Setup Sets the time automatically through the digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the TIME menu option.
-
Page 32: Manual Clock Setup
Manual Clock Setup If current time setting is erased by a power failure or if TV is unplugged, reset the clock. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the TIME menu option. Press the RIGHT arrow button to activate the Time menu.
-
Page 33: Tv Turn Off Time Setup
TV Turn Off Time Setup Lets you set an automatic daily turn off time for your TV. Off Timer function overrides On Timer function if they are both set to the same time. You must set the current time on the clock before using on/off timers.
-
Page 34: Tv Turn On Time Setup
TV Turn On Time Setup Lets you set an automatic daily turn on time for your TV. Off timer function overrides on timer function if they are both set to the same time. Unless a button is pressed within two hours after the TV is turned on by the On Timer function, the TV will auto- matically turn off.
-
Page 35: Sleep Timer Setup
Sleep Timer Setup Lets you select the amount of time if you want your TV to turns itself off, automatically. Using the TIMER button Press the TIMER button on the remote control repeatedly to select the number of minutes. First the Off option will appear on the screen, followed in sequence 10, 20, 30, 60, 90, 120, 180, and 240.
-
Page 36: Auto Off
Auto Off If there is no input signal, the TV can be set up to switch to standby mode automatically after 10 minutes. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the TIME menu. Press the RIGHT arrow button to go to the TIME menu.
-
Page 37: Aspect Ratio Control
Aspect Ratio Control Lets you choose the way that an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed according to your preference.
-
Page 38: Captions
Captions Select a caption mode for displaying captioning informa- tion when provided on the program. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the OPTION menu. Press the RIGHT arrow button to activate the OPTION menu.
-
Page 39: Caption/text
Captions/Text Analog caption displays information at any position on the screen usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable source.
-
Page 40: Caption Option Menu
Caption Option Menu Customize the DTV/CADTV captions that will appear on your screen. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the OPTION menu. Press the RIGHT arrow button to access the OPTION menu. Use the UP/DOWN arrow to select the Caption Option, then press the RIGHT arrow button.
-
Page 41: On-screen Menu Languages
On-Screen Menu Languages Select your preferred language for the menus: English, Español (Spanish), or Français (French). Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the OPTION menu. Press the RIGHT arrow button to go to the OPTION menu.
-
Page 42: Velocity Modulation
Velocity Modulation Use this function to improve the outline distinction of the picture's edges. If you select VM ‘Off’, the TV will automatically return the pictures' edge appearance to factory settings. Press the MENU button on the remote con- trol, then use the UP/DOWN arrow button to select the OPTION menu.
-
Page 43: Cinema 3:2 Mode Setup
Cinema 3:2 Mode Setup Most movies are 24 frames/sec, but TV signal is 30 frames/sec. This option lets the TV do 3:2 pull-down operation for you to watch movies at the best motion appearance. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the OPTION menu.
-
Page 44: Ez Demo
EZ Demo Shows you how to navigate the TV's on-screen menus. Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the OPTION menu. Press the RIGHT arrow button to access the OPTION menu. Use the UP/DOWN arrow button to select EZ Demo, then press the RIGHT arrow button.
-
Page 45: Lock Menu
Parental Lock Setup Lets you set up blocking schemes to block specific channels, ratings, and viewing sources. A password is required to gain access to this menu if the Lock System is activated. If the lock is already set, enter the password as requested. The TV is set up with the initial password ‘0’, ‘0’, ‘0’, ‘0’...
-
Page 46: Parental Lock Setup
Parental Lock Setup (Continued) Parental Lock Rating Descriptions TV-Y (All Children): Program is appropriate for all children. TV-Y7 (Children 7 years and Older): Program is designed for children age 7 and above. TV-G (General audience): Most parents would find this program suitable for all ages. TV-PG (Parental guidance suggested): Program contains material that parents may find unsuitable for younger children.
-
Page 47: Programming The Remote
Programming the Remote The remote control for your HD receiver is a multi- brand or universal remote control. It can be pro- grammed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands.
-
Page 48: Programming Codes
Programming Codes VCRs Brand Codes Brand AIWA AKAI 016 043 046 124 125 146 KENWOOD AMPRO ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 LLOYD BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART MAGIN CRAIG 003 040 135 MAGNAVOX CURTIS MATHES 031 033 041...
-
Page 49
Programming Codes Brand Codes Brand ALPHASTAR DSR AMPLICA GENERAL INSTRUMENT 003 004 016 BIRDVIEW 051 126 129 CAPETRONICS HITACHI CHANNEL MASTER 013 014 015 HOUSTON TRACKER 018 036 055 CHAPARRAL 008 009 012 HUGHES HYTEK CITOH JANIEL CURTIS MATHES 050 145 JERROLD DRAKE 005 006 007...
-
Page 50
Programming Codes CATV Brand Codes Brand 003 004 039 042 046 052 ANTRONIK M-NET ARCHER 005 007 014 MACOM MAGNAVOX CABLE STAR CENTURION MEMOREX CENTURY MOVIE TIME CITIZEN COLOUR VOICE 065 090 COMBANO 080 081 COMTRONICS 019 030 DIAMOND PANASONIC EAGLE 020 030 040 PARAGON...
-
Page 51: Maintenance
Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and pull out the power cord before you begin any cleaning. SCREEN CLEANING 1.
-
Page 52
Maintenance (Continued) PICTURE INTERFERENCE Even though you may be getting cable, the signal may be weak, which means the quality of your picture may suffer due to other factors. If there are problems with the image on your TV, consult the Troubleshooting guide on the following pages. You may also want to contact your cable service provider to determine if the problem is from the cable service.
-
Page 53: Troubleshooting
Troubleshooting Some quick and easy tips for fixing problems yourself. SYMPTOM Snowy picture and unclear sound. Multiple images or ‘ghost shadows.’ Interference: Sharp lines across the screen and unclear sound. Normal picture but no sound. No picture and unclear sound. No picture or sound.
-
Page 54: Troubleshooting
Troubleshooting (Continued) SYMPTOM Remote control doesn’t work. Menu options can’t be changed or selected. No picture or sound when any non-cable source is selected. Weak or no Stereo Sound when using a stereo VCR. Time is incorrect. P A G E 5 4 POSSIBLE SOLUTIONS •...
-
Page 55: Glossary
Glossary A list of definitions for some of the words found in this guide. 75 OHM RF CABLE The round cable that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire sticking through the middle, and it screws onto the threaded jack on the back of your TV.
-
Page 56
Glossary (Continued) A list of definitions for some of the words found in this guide. FAVORITE CHANNELS INPUT JACK MODE MONO SOUND OUTPUT SECOND AUDIO PROGRAMMING/SAP SIGNAL SOURCE STEREO SOUND TUNER P A G E 5 6 This function created a customized list of your favorite chan- nels.
-
Page 57: Product Specifications
Product Specifications Model Horizontal Size (inches) Height (inches) Thickness (inches) Weight (pounds) Power requirement Television system Television Channel Power consumption (W) Antenna Audio Output (W) Supplied accessories Screen Aspect Ratio External input ports Design and specifications are subject to change without prior notice. 32FZ1DC-UB 35.86 23.66...
-
Page 58
Notes P A G E 5 8...
-
Page 59
Notes P A G E 5 9...
-
Page 60: Warranty
LG COLOR TELEVISION LIMITED WARRANTY – USA Your LG Color Television will be will repaired or replaced, at LG’s option, if it proves to be defective in material or work- manship under normal use, during the warranty period ("Warranty Period") listed below, effective from the date ("Date of Purchase") of original consumer purchase of the product.
Comments to this Manuals
Latest comments: