Changing A Halogen Lamp - Miele DA 396-6 Operating Instructions Manual

Cleaning and care

Changing a halogen lamp

The halogen lights become very hot
during operation.
It can cause burns even after being
switched off for some time.
Allow them to cool down for a few
minutes before changing them.
 Disconnect the rangehood from the
mains electrical supply before
replacing the lamp (see "Warning and
Safety instructions").
22
 Remove the grease filters.
 Turn the bolt anti-clockwise as far as
it will go. The halogen lamp will then
drop down towards you.
 Turn the halogen lamp anti-clockwise
and pull it out.
 Replace it with a new lamp of the
same type: GU/GZ 10, 230 V, 50W.
Refit the lamp by reversing the steps
shown above. Please observe
manufacturer's instructions.
 Replace the grease filters.