Section 3 - Configuration
Configuration
This section will show you how to configure your new D-Link mobile router using the web-based configuration utility.
Web-based Configuration Utility
To access the configuration utility, open a web-browser such as Internet Explorer and enter
the IP address of the router (http://192.168.0.1).
Type Admin and then enter the password. By default, the password is blank.
If you get a Page Cannot be Displayed error, please refer to "Troubleshooting" on page 90 for
assistance.
The configuration utility will open to the STATUS.>.DEVICE.INFO page. You can view different
configuration pages by clicking on the categories at the top of the screen (SETUP/ADVANCED/
TOOLS/STATUS/SUPPORT), and then selecting a configuration page from the bar on the left side.
The following pages will describe each section in detail, starting with the SETUP pages.
D-Link DWR-925 User Manual
10