TABLE OF CONTENTS Introduction Accuracy Water resistance “1000 Hours Control” test Use: Mechanical model Use: Quartz model International Guarantee Limited Warranty (United States of America and Canada)
Your individual temperament and your activities may result in slight irregularities. If you were to observe a discrepancy in the running of your watch, we would advise you to entrust it to an authorised Jaeger-LeCoultre retailer who will per- form the necessary adjustments.
The criteria of the “1000 Hours Control” programme considerably exceed the standards of offi cial timing tests, which deal only with part of the movement. Jaeger-LeCoultre tests not only the movement prior to its being cased up in the watch, but also the watch as a whole.
Page 5
Movement Jaeger-LeCoultre Calibre 846. Winding Crown in position 1. Winding is performed by turning the crown clockwise. The watch is fully wound when the crown locks. Do not attempt to wind a manually-wound watch beyond the locking point. To ensure good operating accuracy, it is advisable to wind your watch regularly, at least once a day.
- Quartz movement, Calibre 608. - 32,768 Hz. - The battery reference is 321. Movement Jaeger-LeCoultre Calibre 608. Setting the hour and minutes Pull the crown out to position 2. Move the hands clockwise until the desired time is displayed.
Any part found by our technical services to be defective as a result of a manu- facturing defect will, at the sole discretion of Jaeger-LeCoultre, be repaired or replaced free of charge. The Jaeger-LeCoultre International Guarantee is valid only if the guarantee certifi cate enclosed with this booklet has been duly completed, dated, stamped and signed by the authorised Jaeger-LeCoultre retailer who sold your watch.
Page 8
It is essential to have the water resistance checked by an authorised Jaeger-LeCoultre retailer or an offi cial Jaeger-LeCoultre Service Centre at least once a year, and in any event, prior to any period of intensive use. Please refer to the operating instructions for further details.
The manufacturer’s Limited Warranty applies only to Jaeger-LeCoultre products purchased from authorised Jaeger-LeCoultre retailers. In addition, all maintenance and repair works must be carried out either by an authorised Jaeger-LeCoultre retailer or by an offi cial Jaeger-LeCoultre Service Centre. If these conditions are not met, the manufacturer’s Limited Warranty does not apply.
Page 10
It is essential to have the water resistance checked by an authorised Jaeger-LeCoultre retailer or an offi cial Jaeger-LeCoultre Service Centre at least once a year, and in any event, prior to any period of intensive use. Please refer to the operating instructions for further details.
Page 11
Our offi cial Service Centres employ watchmakers trained at the Jaeger-LeCoultre Manufacture and possess the tools and parts necessary to repair and maintain all Jaeger-LeCoultre watches and clocks. In certain cases, especially for operations requiring special tools and parts, the Service Centres will send your watch to the Jaeger-LeCoultre Manufacture in Switzerland to have the necessary work carried out.
Need help?
Do you have a question about the Mechanical manually-wound and is the answer not in the manual?
Questions and answers