Rear Panel Connections - D-Link DSL-322T User Manual

Rear Panel Connections

All cable connections to the Modem are made at the rear panel. Connect the power adapter here to power on the Modem.
Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the
reset button).
Connect network cables:
1. Insert the ADSL (telephone) cable into the ADSL port and then connect the cable to your telephone line.
2. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the Modem and the
other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
ADSL Port
Use the ADSL cable to
connect to the your telephone
line (RJ-11 port)
DSL-322T ADSL Modem User Guide
USB Port
Connect USB cable here
and install USB driver
Ethernet Port
Use the Ethernet port
to connect the Modem
to your Ethernet LAN
or computer
Reset Button
To manually reset, depress
button with the power on
for at least seven seconds
3
Power Insert
Use the adapter
shipped with the
Modem to connect to
power source