Turning On The Monitor; Menu Language Setup - LG MT-50PZ40, MT-50PZ41, MT-50PZ43S, MZ-50PZ42, MZ-50PZ43 Owner's Manual

Turning on the Monitor

- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
1. Connect power cord correctly.
2. Press the ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the
INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT button on the remote control and
then the Monitor will be switched on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor is turned off with the
• Press the ON/OFF button on the Monitor to turn on the Monitor.
2. If the Monitor is turned off with the remote control and also the ON/OFF button on the Monitor
• Press the ON/OFF button on the Monitor and then press the INPUT SELECT button on the Monitor or press
the POWER, INPUT SELECT button on the remote control to turn on the Monitor.
• Adjusting volume level
Volume( G G ) button increases the level of sound and volume(

Menu language setup

- The menu can be displayed on the screen in desired language. First select your language.
1. Press the MENU button and then
2.. Press the button and then
G G
3. Press the button and then
G G
From this point on, the on-screen display will be presented in the language of
your choice.
4. Press the MENU button.
14
ON/OFF button on the Monitor
F F
button to select the SPECIAL menu.
D D / E E
button to select Language .
D D / E E
button to select your desired language.
D D / E E
) button decreases the level of sound.