Table of Contents
Advertisement
Turning on the Monitor
- When using the remote control, aim it at its sensor on the Monitor.
Turning on the Monitor just after installation
1. Connect power cord correctly.
2. Press the
ON/OFF button on the Monitor. At this moment, the Monitor is switched to
standby mode. Press the INPUT SELECT button on the Monitor or press the POWER,
INPUT SELECT button on the remote control and then the Monitor will switch on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor was turned off with the
• Press the
ON/OFF button on the Monitor to turn the Monitor on.
2. If the Monitor was turned off with the remote control and the
• Press the
ON/OFF button on the Monitor and then press the INPUT SELECT button on the
Monitor or press the POWER, INPUT SELECT button on the remote control to turn the Monitor on.
Menu Language Selection
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use
2. Press the
G
button and then use
G
3. Press the
button and then use
From this point on, the on-screen menus will be shown in the language of your choice.
4. Press the MENU button.
14
ON/OFF button on the Monitor
D
E
button to select the SPECIAL menu.
/
button to select LANGUAGE.
D
E
/
D
E
button to select your desired language.
/
ON/OFF button on the Monitor
SPECIAL
LANGUAGE
OSD ROTATE
ORBITER
WHITE WASH
COLOR TEMP.
SET ID
G
ENGLISH
ESPAÑOL
PORTUGUÊS
FRANÇAIS
Advertisement
Table of Contents
