Samsung LN32B530 User Manual page 36

on
if?'.~
Software Upgrade
HD Connection Guide
Contact Samsung
INPUT I SUPPORT
• Configuring the Input Menu
U
Source
List
Use to select TV or other external input sources such as DVD
I
Blu-ray players
I
Cable Box
I
Satellite receivers (Set-Top Box) connected to the TV Use to select the input source of your
choice
(' 5 1
Press the SOURCE button on the remote control to view an external signal source.
TV, AV1, AV2, Component1, Component2, PC, HDMIIDVI, HDMI2, HDMI3 (LN52B530)
TV, AV, Component, PC, HDMIIDVI, HDMI2, HDMI3 (LN32B530, LN37B530, LN40B530,
LN46B530)
f2
You can choose only those external devices that are connected to the TV. In the Source
List, connected inputs will be highlighted and sorted to the top Inputs that are not
connected will be sorted to the bottom.
fB
Using the Color buttons on the remote with the Source list
- Red (Refresh) Refreshes the connected external devices. Press this if your Source is on and connected, but does not
appear in the list.
- TOOLS (Tools) Displays the Edit Name and Information menus
:-J
Edit
Name
Name the device connected to the input jacks to make your input source selection easier.
VCR
I
DVD
I
Cable STB
I
Satellite STB
I
PVR STB
I
AV Receiver
I
Game
I
Camcorder
I
PC
I
DVI PC
I
DVII TV IIPTV
I
Blu-ray
I
HD DVD
I
DMA
fE)
When a PC with a resolution of 1920
X
1080@60Hz is connected to the HDMIIN 1 port, you should set the HDMI1IDVI mode
to DVI PC in the Edit Name of the Input mode.
• Configuring the Support Menu
U
Self
Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check the color pattern on the
screen to see if the problem still exists.
• Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
There may be a problem with the TV Contact Samsung's call center for assistance.
• No If the test pattern is properly displayed, select No. There may be a problem with your
external equipment. Please check your connections. If the problem still persists, refer to
the external device's user manual.
.~
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the
sound by playing a built-in melody sound through the TV 'Does the problem still exist with this sound test?· appears on the screen
If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Select is set to TV
speaker in the Sound menu.
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the MUTE button.
• Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV Contact Samsung's call center for assistance.
• No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections If the problem still persists, refer to the external device's user manual.
Signal Strength (digital channels only)
Unlike analog channels, which can vary in reception quality from 'snowy' to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can.
however, adjust your antenna to improve the reception of available digital channels.
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.