Samsung LN32B530 User Manual page 24

II
5k"
II#!
Menu
tarlguage
Sto<e Demo, Chennels, and limll \\OU
Start
jill
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER
C) button on the remote control.
IZJ
You can also use the POWER C) button on the TV
IZJ
The message Menu Language, Store Demo, Channels, and Time will be set. is
displayed.
2. Press the ENTER QlI button, then Sets the menu language. menu is automatically displayed.
3. Press the £ or T button to select the language, then press the ENTER QlI button. The message Select 'Home Use' when
installing this TV in your home. is displayed.
4. Press the .... or
~
button to select Store Demo or Home Use, then press the ENTER QlI button. The message Select the
Antenna source to memorize. is displayed.
121
We recommend setting the TV to Home Use mode for the best picture in your horne environment
Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and
you want to return to Home Use (Standard): Press the volume button on the TV When the volume OSD is displayed,
press and hold the MENU button on the TV for 5 seconds.
5. Press the £ or T button to memorize the channels of the selected connection. Press the ENTER QlI button to select Start
I2J
Air: Air antenna signal.
I
Cable: Cable antenna signal.
I
Auto: Air and Cable antenna signals.
iEJ
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the £, T, .... or
~
button, then press the ENTER QlI button If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
6. Press the ENTER QlI button to select Start The TV will begin memorizing all of the available channels
[I,']
To stop the search before it has finished, press the ENTER QlI button with Stop selected.
IZJ
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTER QlI button when channel memorization is complete. The message Set the Clock Mode. is
displayed
7. Press the ENTER G button.
Press the
£
or T button to select Auto, then Press the ENTER QlI button. The message Set to daylight saving time. is
displayed. If you select Manual, Set current date and time is displayed.
8. Press the £ or T button to select Off, On or Auto, then press the ENTER QlI button.
9. Press the £ or T button to highlight the time zone for your local area. Press the ENTER QlI button. If you have received a
digital signal, the time will be set automatically. If not, see page 30 to set the clock.
10. The connection method to provide the best quality HD is offered After confirming the method, press the ENTER QlI button.
11. The message Enjoy your watching. is displayed. When you have finished, press the ENTERQlI button.
If you want to reset this feature ...
1. Press the MENU button to display the menu. Press the
£
or T button to select Setup, then press the ENTER QlI button.
2. Press the ENTER QlI button again to select Plug & Play.
iPI
The Plug & Play feature is only available in the TV mode.