NEC SV9100 Basic User's Manual page 2

CALL FORWARD - ALL
Forwards all calls immediately.
To Set
◆
Press Call FWD Key or dial
741.
◆
Dial 1 to Set.
◆
Dial destination number.
◆
Replace Handset.
To Cancel
◆
Press Call FWD Key or dial 741.
◆
Dial 0 to Cancel.
◆
Replace Handset.
CALL FORWARD BUSY NO ANSWER
Forwards calls only after 4 – 6 rings and on
busy tone.
To Set
◆
Press CF B/NA Key or dial 744
◆
Dial 1 to Set.
◆
Dial destination number.
◆
Replace Handset.
To Cancel
◆
Press CF B/NA Key or dial 744
◆
Dial 0 to Cancel.
◆
Replace Handset.
CALL PICK UP
To answer a ringing extension in your
group:
◆
Lift handset and press PICK
◆
Soft key or dial ∗ #.
◆
For ringing extensions not in your group:
Lift handset, dial ∗ ∗ plus ringing extension
number.
Note: Access codes used in this reference sheet are the systems default settings
P:\User Guides\NEC\SV9100\SV9100 Master User Guide.docx
NECALL Voice & Data 08 9455 3122 - Date 23/02/2015 Issue 1
To Record Greeting
◆
Press Day VM or Night VM key
◆
Press Greet soft Key or dial 0 then 4
◆
Press Greet soft key or dial 1
◆
Press Record soft key or dial 7
◆
Press Done soft key or dial #
To Listen to Messages
◆
Press Day VM or Night VM key
◆
Press stn Soft Key or dial 0 then 5
◆
To Delete press Del soft key or dial 3
Voicemail Number
Internally:
◆
Dial Mailbox number e.g. 100
Externally:
◆
Dial # followed by Mailbox number
BACKGROUND MUSIC
Set/Cancel.
◆
Press Speaker.
◆
Dial 725.
◆
Press Speaker
PROGRAMMING ONE TOUCH KEYS
To Program One Touch Keys using spare
Function key:
◆
Press Speaker key.
◆
Dial 751.
◆
Press an available Function key.
◆
Dial 01.
◆
Enter either extension number or
external number including 0 for an
◆
outside line.
◆
Press HOLD then Speaker key.
To Access
◆
Press desired Function Key
SPEED DIAL
SYSTEM SPEED DIALS (Can be used by all
handsets)
To store Speed Dial numbers:
◆
Press [Speaker]
◆
753 (Code for system Speed dials)
◆
Dial system storage code. (e.g.: 500,
501 etc.)
◆
Dial telephone number you want to
store (up to 24 digits).
◆
Press [Hold].
◆
Enter the Name associated with the
Speed Dial number.
◆
Press [Hold]
◆
Press [Speaker] to hang up or repeat
steps 3 to 7 to program another System
Speed Dial bin
To Access System Speed Numbers:
◆
Dial #2 then Speed Dial number
To Program STA Speed Numbers:
◆
Press PROG Soft key.
◆
Press STA Soft key.
◆
Dial Buffer Location (1~0, Up to 10
numbers).
◆
Enter either extension number or
external number including 0 for an
◆
outside line.
◆
Press HOLD.
◆
Enter Name using dial pad.
◆
Press HOLD.
◆
Press Speaker key.
◆
To Access
◆
Press DIR Soft key.
◆
Press STA Soft key.
◆
Select number by pressing the up and
down arrow Soft keys.
◆
Press DIAL Soft key
DISPLAY
To adjust the Display:
◆
Press the Cursor button up or down
while the phone is idle.
◆
To adjust the Speaker/Receiver Volume:
◆
Press Speaker and dial 729
◆
Press the Cursor button up or down
during conversation
The DT Series has 8 kinds of ringer
tones which you can select:
◆
Press Speaker and dial 720.
◆
Dial 1 to set internal ring: Dial 2 to set
External ring.
◆
Dial code for desired ring pattern (1~8).
◆
Replace Handset.