4 Replacement Procedures
Installing the MDC
The following describes the procedure for installing the MDC. (See Figure 4-39.)
1. Connect the MDC cable to the connector on the MDC.
2. Connect the MDC to the connector CN3010 on the system board.
3. Arrange the MDC cable in place and wrap it with the insulator.
4. Secure the MDC with the following screws.
4-64
Downloaded from LpManual.com Manuals
M2.04.0B
BIND screw
[CONFIDENTIAL]
2
PORTÉGÉ M780 Maintenance Manual (960-809)
4.23 MDC