Tests and Diagnostics
Subtest 7
NOTE: Make sure that this subtest is executed on the following condition:
1. Flat desk with vertical plane to get the stability of machine.
2. The vertical wall or plane is necessary.
3. Prevent the machine from shake or shock.
<Example>
Set the machine
against the vertical plane
with the Front upward
Flat desk
3-54
Downloaded from LpManual.com Manuals
Acceleration sensor
This subtest detects and corrects the each axis (X, Y, Z).
The figure below shows the name and position of each side.
Back
Left side
[CONFIDENTIAL]
Vertical plane
Top
(heaven surface)
Right side
Front
PORTEGE M780 Maintenance Manual (960-809)