4.23 MDC
4.23 MDC
Removing the MDC
The following describes the procedure for removing the MDC. (See Figure 4-39.)
1. Remove the following screws securing the MDC.
2. Turn up the insulator.
3. Disconnect the MDC from the connector CN3010 on the system board.
4. Disconnect the MDC cable from the connector on the MDC.
Modem jack
PORTÉGÉ M780 Maintenance Manual (960-809)
Downloaded from LpManual.com Manuals
M2.04.0B
BIND screw
Insulator
Figure 4-39 Removing the MDC
2
M2.0x4.0B BIND
MDC cable
[CONFIDENTIAL]
4 Replacement Procedures
MDC
CN3010
4-63