Displaying An Image From Hdmi Equipment; Input Skip - Sharp Aquos LC-42BT10U Operation Manual

Using external equipment
Displaying an image from HDMI
equipment
To watch an HDMI equipment image,
1
select "INPUT4" or "INPUT5" from "INPUT
SOURCE" menu using INPUT on the remote
control unit or on the TV.
INPUT SOURCE
Press MENU to display the MENU screen,
2
and then press c / d to select "Option".
Press a / b to select "HDMI Setup", and then
3
press ENTER.
Audio Only
Digital Noise Reduction
HDMI Setup
Output Select
Press a / b to select the desired item, and
4
then press ENTER.
Press a / b / c / d to select the desired
5
setting, and then press ENTER.
HDMI
Selectable
Setup
items
items
Signal RGB
YCbCr 4:4:4
Type
YCbCr 4:2:2
Enable
Auto View
Disable
Audio Digital
Select Analog
Press MENU to exit.
6
NOTE
• Refer to your external equipment operation manual for the
signal type.
• "Signal Type" is only available when an HDMI-DVI
conversion cable is connected.
• "Audio Select" is only available for INPUT 4.
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
32
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
INPUT6
[Low]
[Fixed]
Description
Select the video signal type from
the HDMI terminal.
Set whether or not to use
View Mode based on signal
recognition, including an HDMI
signal.
Select "Digital" for an audio
signal via the HDMI terminal.
Select "Analog" for an audio
signal via the R-AUDIO -L
terminal.

Input Skip

This setting allows you to skip the HDMI or DVI Input
on the Input Selection operation.
Press MENU to display the MENU screen,
1
and then press c / d to select "Setup".
Press a / b to select "Input Skip", and then
2
press ENTER.
Press a / b to select the Input (INPUT 4,
3
INPUT 5, INPUT 6) you wish to skip, and then
press ENTER.
Input 4 (HDMI)
Input 5 (HDMI)
Input 6 (DVI)
Press c / d to select "Yes", and then press
4
ENTER.
Press MENU to exit.
5
Yes No