Sharp Aquos LC-32D43U Operation Manual page 8

QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• Ifs best to use 2 people to remove the AQUaS television for stability.
• Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUaS television in a vv'ell ventilated area and make sure not to place it by a heat source or use near
water. The AQUaS television is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
~
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
B) paWER indicator on the front of the
AQUaS television lights GREEN.
POWER
- VOL
+
v
CH A
J1
How to turn on the AQUaS television for the
first time.
A) Press POWER on AQUaS television.
Connect the AC plug for the AQUaS television
into the AC outlet.
Attach your antenna to the back of the AQUaS
television. (See page 12.)
-------l,''l'''''"'---:aD3 . .
lAC
outlet
I
• Place the 1V close to the AC outlet, and keep the power
plug within reach.
POWER SLEEP
ope
o
0
@
0 0
• TO PREVENT RISK OF ELeCTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
• Affix the AC cord onto the
hook and place the ferrite
core in the space in the 1V
cabinet as shown.
Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with cable clamps and a cable tie.
Ferrite core
POWER indicator
• Speakers cannot be detached from the 1V.
• 1V angle cannot be adjusted.
@-7