Troubleshooting - JVC KD-X220 Instruction Manual

MORE INFORMATION
Change the display information
Press repeatedly.
FM or AM Station name (PS)*
1
Title* *
* 1
For FM Radio Broadcast Data System stations only.
*
2 If unavailable, "NO PTY" / "NO TEXT" appears.
USB Playing time
Folder/file name
* 3
If not recorded, "NO NAME" appears.
USB-IPOD Playing time
USB-ANDROID (back to the beginning)
*
4 If not recorded, "NO NAME" appears.
PANDORA Station name
Day/Clock
IHEART Station name
to the beginning)
* 5
If unavailable, station name appears.
AUX AUX
BT AUDIO BT AUDIO
JS_JVC_KD_X220_J_EN_2.indd 15
1 Frequency Program type (PTY)*
2
Day/Clock (back to the beginning)
Day/Clock Album title/Artist*
(back to the beginning)
Day/Clock Album title/Artist*
Album title/Artist Track title
(back to the beginning)
5 5
Track title* Track Artist*
Day/Clock
Day/Clock

TROUBLESHOOTING

Symptom
Sound cannot be heard.
1 * 2
"MISWIRING CHECK WIRING
THEN PWR ON" appears.
3 3
Track title*
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
4 4
Track title*
• Radio reception is poor.
• Static noise while listening
to the radio.
Playing time
Playback order is not as
intended.
Day/Clock (back
Elapsed playing time is not
correct.
"NOT SUPPORT" appears and
file skips.
"READING" keeps flashing.
"CANNOT PLAY" flashes and/
or connected device cannot
be detected.
The iPod/iPhone does not
turn on or does not work.
Correct characters are not
displayed.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals
of the speaker wires are insulated properly. Turn the
power on again.
Send the unit to the nearest service center.
Check the [SRC SELECT] setting. ( 4)
• Connect the antenna firmly.
• Pull the antenna out all the way.
The playback order is determined by the file name
(USB).
This depends on the recording process earlier.
Check whether the file is a playable format. ( 14)
• Do not use too many hierarchical levels and folders.
• Reattach the USB device.
• Check whether the connected device is compatible with
this unit and ensure the files are in supported formats.
( 14)
• Reattach the device.
• Check the connection between this unit and iPod/
iPhone.
• Detach and reset the iPod/iPhone using hard reset.
This unit can only display uppercase letters, numbers,
and a limited number of symbols.
ENGLISH
15
11/9/2014 4:42:40 PM