Display Settings - JVC KD-X220 Instruction Manual

DISPLAY SETTINGS

1
Press and hold
2 Turn the volume knob to make a selection (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected/activated or follow
the instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS]
setting.
OFF: Selects the day adjustments. ; ON: Selects the night adjustments. ;
DIMMER TIME: Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [ON] time, then press the knob.
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Changes between the day and night adjustments when you turn off or
on the car headlights. *
JS_JVC_KD_X220_J_EN_2.indd 13
.
.
1
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night
separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone for setting. ( Illustration on left)
3 Set the brightness level (00 to 31). (Default: DAY: 31 ; NIGHT: 15)
2
SCROLL * ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at
5-second intervals. ; OFF: Cancels.
[NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car's
headlight.
* 1
The illumination control wire connection is required. ( 19)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
Default: XX
13
ENGLISH
11/9/2014 4:42:40 PM