Operation; Switching The Fan On; Selecting The Power Level - Miele DA 3466 Operating And Installation Instructions

Switching the fan on

 Pull the deflector plate out. For
optimum extraction with minimum
noise levels always pull the deflector
plate out to its full extent.
The fan will switch on at level 2. The 
symbol and 2 will light up in the power
level display.

Selecting the power level

For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
When frying or cooking food with a very
strong aroma, select the Intensive
setting IS.
 For a lower power level, press the
"" control, or "" for a higher level.
Automatic switch-off of the
Intensive setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level 3.
 To set this option, both the fan and
the hob lighting must be switched off
and the deflector plate pushed in.
 Press the "" and "" controls at
the same time for approx. 10
seconds, until the 1 lights up.
 Then press in turn,
– the lighting control ,
– the "" control and then
– the lighting control  again.
If 1 and IS flash Automatic switch-off is
not activated.
 To activate it press the "" control.
If 1 and IS are lit up Automatic switch-
off is activated.
 To deactivate it press the "" control.
 Use the On/Off control  to confirm
your choice of setting.
If you do not confirm within 4
minutes, the cooker hood will revert
to the old setting.

Operation

17