Roller Assembly - California Trimmer Mower Maintenance Manual

Heavy Duty & Commercial

Roller Assembly

Tools Required:
1 Bearing Driver
1 Hammer
1/2" Wrenches
1
Step 1
Install one bearing holder with the bearing on one side of the roller shaft.
One end plate on the roller is set deeper inside the roller than the other.
Step 2
Install roller shaft with the bearing holder on the plate that is set deeper. Use bolts, locks washers and
washers. Do not tighten at this time.
Step 3
Install a bearing holder with bearing on opposite end of the roller.
California Trimmer Mower
Maintenance Manual
40