Assembly And Setup; Carton Contents - California Trimmer RL205H Operator's Manual

REEL MOWER OPERATOR'S MANUAL (RL205H/207H)
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Evergreen Turf Equipment directly for
product and accessory information, help finding a dealer,
or to register your product.
Whenever you need service, genuine California Trimmer
parts, or additional information, please contact an
Authorized Service Dealer or Customer Service and
have the model and serial numbers of your product
ready. They are located on the decal next to the engine
as shown in this photo...
Write the numbers in the space provided.
Model Number: ____________________________
Serial Number: ____________________________
You may complete and mail the enclosed product
registration forms (California Trimmer and Honda
Engine) or you can register on-line at:
http://caltrimmer.com
http://engines.honda.com
Should you require warranty service, take a copy of your
sales receipt and a copy of your product registration card
to your servicing dealer.

Carton Contents

In addition to this manual, the following are included...
- California Trimmer Reel Lawnmower
- California Trimmer Product Registration Card
- Engine Owner's Manual
- Engine Emission System Warranty
- Upper Handle Assembly (including clutch
engagement lever and attached cable), roller lift handle
& rod, and fasteners to attach it to the lower handle)
- Catcher Assembly (including bail rod, washers &
cotter pins for attaching lift rod.
Evergreen Turf Equipment, LLC • 1028 4
The unit has been carefully assembled with numerous
adjustments and quality inspections performed by a
team of trained factory technicians who take great pride
in their work. To facilitate packaging and shipment, there
are components that need to be installed.
Note: It is recommended that this unit be set up and
checked by an Authorized Dealer.
Tools Required
- 2 x 1/2" wrenches / 1 x 7/16" wrench
- Phillips head screwdriver - Small pliers
1. Fasten the upper and lower handles together with
four 5/16"-24
bolts (#20),
flat washers
(#30) and
lock nuts
(#21). Note
the washers
(#30) are
placed on the
bolts (#20)
before they
are installed.
2. Attach the
roller lift rod
(#15) to the toggle (#22) using the cotter pin (#3).
3. The clutch activation lever and cable have already
been fastened and connected. When installing the
upper handle as described in section 1 above, ensure
that the clutch cable routing is as depicted in the
image below.
Note: The clutch engagement lever may be
slightly stiff at first however it will become
smoother after some initial use.
th
St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.com
Assembly & Set-up